Earthwork
Enchance earthwork operations through frequent and accurate earth movement and stockpile volume measurements.
Painpoints
Advantages
Absence of frequently updated stockpile measurements can lead to project delays and inaccurate resources supply.
Generate updated Stockpile Measurement with Point Cloud Data at any time.
Inefficient walk-based methods results on higher labor cost and time.
Cut field work time with efficient drone-based data collection.
Stockpile manual measurements accuracy can be compromised by human errors.
Ensure data quality and consistency with repeatable mission flights.
Solution
Portable Drone Surveying & Mapping Solution
Automated Routine Stockpile Measurement Solution
Portable Drone Surveying & Mapping Solution
The DJI Matrice 4E is a portable surveying and mapping drone suitable for single-pilot operations. Paired with DJI Terra or your preferred 3rd Party Earthwork Software, it can generate accurate Point Clouds and 3D models to measure stockpile volumes.
Portable solution, easy to operate and to carry across multiple construction sites.
Centimeter-level data thanks to its mechanical shutter and RTK capability.
Obtain multiple data outputs such as 3D Models, DSM, DEM, and Point Clouds for efficient earthwork monitoring.
Drone Platform
DJI Matrice 4E
... Open
Weight: 1219 g (with propellers)
Max Flight Time (without wind): 49 minutes
Environment Adaptability: Max takeoff altitude 6000 m, max wind speed resistance 12 m/s
Sensing System: Omnidirectional binocular vision system, supplemented with a 3D infrared sensor at the bottom of the aircraft
Mechanical Shutter Speed: 2-1/2000 s, minimum photo interval 0.5 s
Wide-Angle Camera: 4/3-inch CMOS, 20MP effective pixels
Medium Tele Camera: 1/1.3-inch CMOS, 48MP effective pixels
Telephoto Camera: 1/1.5-inch CMOS, 48MP effective pixels
Laser Rangefinding: 1800m measurement range (1 Hz) @20% reflectivity target
Max Flight Time (without wind): 49 minutes
Environment Adaptability: Max takeoff altitude 6000 m, max wind speed resistance 12 m/s
Sensing System: Omnidirectional binocular vision system, supplemented with a 3D infrared sensor at the bottom of the aircraft
Mechanical Shutter Speed: 2-1/2000 s, minimum photo interval 0.5 s
Wide-Angle Camera: 4/3-inch CMOS, 20MP effective pixels
Medium Tele Camera: 1/1.3-inch CMOS, 48MP effective pixels
Telephoto Camera: 1/1.5-inch CMOS, 48MP effective pixels
Laser Rangefinding: 1800m measurement range (1 Hz) @20% reflectivity target
Workflow
- Data Collection: Design a 2D map mission for consistent orthomosaic data acquisition.
- Data Processing: Utilize DJI Terra for processing, generating a high-accuracy dense Point Cloud from the collected data.
- Data Analysis: Measure stockpile volumes efficiently with DJI Terra. Alternatively, import the Point Cloud data directly into third-party software for comprehensive cut and fill analysis.
Automated Routine Stockpile Measurement Solution
The DJI Dock 3 allows you to automate recurrent stockpile measurement task effortlessly. Schedule remote data collection flights and upload collected data to DJI FlightHub 2 or your preferred Earthwork Software for timely project progress checks.
Schedule routine data collection flights for frequent centimetric level earthwork measurement and analysis.
Obtain accurate data outputs such as 3D Models, DSM, and Point Clouds for efficient earthwork monitoring.
Upload and analyze the collected data to DJI FlightHub 2 for cross-team collaboration.
Drone Platform
DJI Matrice 4D
... Open
Weight: 1850 g
Max Flight Time: 54 minutes
Environment Adaptability: IP55 rating, max takeoff altitude 6500 m, max wind speed resistance 12 m/s
Sensing System: Omnidirectional binocular vision system, supplemented with a 3D infrared sensor at the bottom of the aircraft
Mechanical Shutter Speed: 2-1/2000 s, minimum photo interval 0.5 s
Wide-Angle Camera: 4/3-inch CMOS, 20MP effective pixels
Medium Tele Camera: 1/1.3-inch CMOS, 48MP effective pixels
Telephoto Camera: 1/1.5-inch CMOS, 48MP effective pixels
Laser Rangefinding: 1800m measurement range (1 Hz) @20% reflectivity target
Max Flight Time: 54 minutes
Environment Adaptability: IP55 rating, max takeoff altitude 6500 m, max wind speed resistance 12 m/s
Sensing System: Omnidirectional binocular vision system, supplemented with a 3D infrared sensor at the bottom of the aircraft
Mechanical Shutter Speed: 2-1/2000 s, minimum photo interval 0.5 s
Wide-Angle Camera: 4/3-inch CMOS, 20MP effective pixels
Medium Tele Camera: 1/1.3-inch CMOS, 48MP effective pixels
Telephoto Camera: 1/1.5-inch CMOS, 48MP effective pixels
Laser Rangefinding: 1800m measurement range (1 Hz) @20% reflectivity target
DJI Dock 3
... Open
Weight: 55 kg (without the drone)
Size: 1760×745×485 mm (L×W×H, dock cover opened)
Environment Adaptability: -30° to 50° C (-22° to 122° F) operating temperature, IP56 rating, maximum operating altitude 4500 m
Max Operating Radius: 10 km
Charging Time: 27 minutes
Security Camera (Internal) Resolution: 1920×1080
Size: 1760×745×485 mm (L×W×H, dock cover opened)
Environment Adaptability: -30° to 50° C (-22° to 122° F) operating temperature, IP56 rating, maximum operating altitude 4500 m
Max Operating Radius: 10 km
Charging Time: 27 minutes
Security Camera (Internal) Resolution: 1920×1080
Payload And Software
Workflow
- Data Collection: Design a routine 2D map mission for consistent orthomosaic data acquisition.
- Data Processing: Process the data in DJI FlightHub 2 to generate a high-accuracy dense Point Cloud.
- Data Analysis: Utilize DJI FlightHub 2 or third-party software to compare the Point Cloud data with the design file, automatically calculating cut and fill measurements.