FAQ

Matrice 350 RTK and Matrice 300 RTK. The only compatible remote controller is DJI RC Plus. Before using, please update the drone and the remote controller to the latest firmware.

It can be mounted onto any gimbal connector on Matrice 350 RTK or Matrice 300 RTK.

IP54.

^{Under controlled laboratory conditions, it can achieve an IP54 protection rating by IEC60529 standards. The IP rating is not permanently effective and may decrease due to product wear and tear.}

≥ 35 lux@100 m.

^{Measured in a laboratory environment at an ambient temperature of 25° C (77° F) with the Zenmuse S1 installed on the aircraft and using the Both On mode.}

The Low Beam mode and the Both On mode have an FOV of 15°, corresponding to an illuminated area of approximately 544 m² at a distance of 100 m.
The High Beam mode has an FOV of 4°, corresponding to an illuminated area of approximately 38 m² at a distance of 100 m.

The Low Beam mode provides a wide and evenly distributed beam spread, matching the field of view of Zenmuse H20/H30 series cameras at 5× zoom and above. It is suitable for ground illumination and supplementary lighting for imaging.
The High Beam mode provides a narrower but highly penetrating beam spread, matching the field of view of Zenmuse H20/H30 series cameras at 15× zoom and above. It is suitable for long-distance observation while maintaining low power consumption.
The Both On mode provides a wide beam spread and high central illuminance. It is suitable for ground operation lighting and long-distance lighting.

1. Using the spotlight in high humidity environments may cause fogging, which does not affect its optical performance. After use, please place it in a dry, ventilated area for a short period, and the fog will naturally dissipate.
2. When using the spotlight at night, there may be instances of false obstacle avoidance. You may disable obstacle avoidance if necessary and operate the aircraft and spotlight in relatively open and unobstructed areas.
3. Do not directly touch or scratch the coating on the surface of the spotlight lens with hard objects, as this may lead to a decrease in light output efficiency, affecting luminous flux and illuminance.
4. When cleaning the spotlight lens, be sure to use a soft, dry, clean cloth to wipe the lens surface. Do not use alkaline detergents.
5. Store the spotlight in a secure case and keep it dry and ventilated. The recommended ambient humidity is between 40% and 50%.

Including but not limited to public safety, emergency rescue, emergency repairs, traffic enforcement, and equipment inspection.

When used in low-temperature environments, a temperature difference between the inside and outside of the lens may cause internal fogging. This is a common physical phenomenon and is difficult to avoid entirely. Based on our tests, fogging has minimal impact on illuminance and does not noticeably affect product performance. The device can be used normally.