Specs

General

• Product Name

• Zenmuse S1

• Weight

• 760±10 g

• Dimensions

• 125×152×171 mm (L×W×H)

• Rated Power

• 68 W

• Supported Aircraft

• Matrice 300 RTK (requires DJI RC Plus)
  Matrice 350 RTK

• Eye Safety Class

• IEC 62471: Risk Group 1

• Shell Temperature

• <50° C (122° F, plastic shell)
  
  ^{Measured in a laboratory environment at an ambient temperature of 25° C (77° F) with the Zenmuse S1 installed on the aircraft.}

• Ingress Protection Rating

• IP54
  
  ^{Under controlled laboratory conditions, it can achieve an IP54 protection rating by IEC60529 standards. The IP rating is not permanently effective and may decrease due to product wear and tear.}

Environment

• Operating Temperature

• -20° to 40° C (-4° to 104° F)

• Storage Temperature

• -20° to 60° C (-4° to 140° F)

Gimbal

• Stabilization System

• 3-axis (tilt, roll, pan)

• Angular Vibration Range

• Hover: ±0.01°
  Flight: ±0.02°

• Mounting

• Detachable DJI SKYPORT

• Mechanical Range

• Tilt: -129° to +73°
  Roll: ±55.8°
  Pan: ±327°
  
  ^{Structural limit, not controllable range.}

• Controllable Range

• Tilt: -120° to +60°
  Pan: ±320°

• Operation Mode

• Follow / Free / Re-center

Illuminance

• Maximum Central Illuminance

• 35 lux @100 m (Both On mode)
  
  ^{Measured in a laboratory environment at an ambient temperature of 25° C (77° F) with the Zenmuse S1 installed on the aircraft.}

• Low Beam Central Illuminance

• 13 lux @100 m (Low Beam mode)
  
  ^{Measured in a laboratory environment at an ambient temperature of 25° C (77° F) with the Zenmuse S1 installed on the aircraft.}

• High Beam Central Illuminance

• 30 lux @100 m (High Beam mode)
  
  ^{Measured in a laboratory environment at an ambient temperature of 25° C (77° F) with the Zenmuse S1 installed on the aircraft}

• Effective Illumination Angle

• 15±1° (10% relative illuminance, Low Beam mode and Both On mode)
  4±0.5° (10% relative illuminance, High Beam mode)

• Typical Color Temperature

• 6500K typical value (Low Beam mode)
  7500K typical value (High Beam mode)
  
  ^{Measured in a laboratory environment at an ambient temperature of 25° C (77° F) using an integrating sphere. Actual results may vary slightly due to different experimental conditions, and the final effect is subject to actual use.}

• Dimming Mode

• Analog dimming

• Effective Illumination Distance

• 500 m (Both On mode)
  
  ^{Measured in a laboratory environment at an ambient temperature of 25° C (77° F). Actual conditions may vary slightly due to specific environmental humidity, weather conditions, and other factors. The final effect is subject to actual use.}

Basic Features

• Lighting Control

• Turning light on/off, brightness adjustment

• Strobe Mode

• 5 Hz strobe

• Lighting Mode

• Low Beam mode, High Beam mode, Both On mode

• Remote Controller Buttons

• Can be set for turning the light on/off, brightness adjustment, or lighting mode changes

• Gimbal Synchronization

• Supports synchronized control with other gimbal-equipped payloads

Special Features

• Eye Protection

• Automatically limits brightness to 40% when not in flight

• Payload Protection

• LED, LEP temperature protection, overcurrent protection, and power protection to prevent damage.