Additional Response
Diversify your response scope for Hazmat, water rescue, and other unexpected emergencies with multipurpose aerial support.
Painpoints
Advantages
Firefighters often find themselves short-handed and unequipped to properly evaluate the risks in the event of a hazardous material leakage.
Improve response efficiency with valuable situational awareness and quality data.
Water rescue scenarios are often coordinated by land-based teams with limited resources and information.
Gain rapid aerial perspectives and real-time monitoring, enhancing the effectiveness of water rescue missions.
Fire prevention efforts usually require extensive manual labor, with teams going on foot scouting for potential fire risks.
Cover large areas, make informed decisions, and allocate resources effectively with accurate aerial data.
Solution
Hazmat Response
Water Rescue
Brush Clearance and Inspection
Hazmat Response
The Matrice 350 RTK, equipped with the Zenmuse H30T, brings enhanced thermal capabilities to Hazmat response. Expand the M350 RTK's capabilities with a third-party payload for gas detection sensing.
Reliable multipurpose drone platform easily adapts to the mission needs.
Powerful Infrared Sensor with 1280 × 1024 resolution provides superb thermal imagery.
Robust and reliable, IP54 graded, allows you to fly when is most needed.
Laser range finder to get accurate coordinates of objects up to 3,000 meters range.
Enhanced full-color or black-white night vision to easily identify risks.
Drone Platform
Matrice 350 RTK
Weight: Approx. 6.47 kg(with single downward gimbal and two TB65 batteries).
Max Flight Time: 55 minutes.
Sensing system: Six-directional sensing and positioning.
Environment Adaptability: IP55, Max Service Ceiling Above Sea Level 7,000 m (with 1676 propellers,without other payload); Max Wind Resistance 12 m/s.
Payload And Software
Zenmuse H30T
Weight: 920±5 g.
Ingress Protection Rating: IP54.
Zoom Camera: 1/1.8-inch CMOS, Effective Pixels: 40 MP.
Wide-Angle Camera: 1/1.3-inch CMOS, Effective Pixels: 48 MP.
Infrared Thermal Camera: 1280×1024@30fps.
Laser Range Finder: max range 3000 m.
DJI Pilot 2
Ground control
DJI FlightHub 2
Drone and dock's cloud management system
Workflow
  1. Mission Execution:
    - Fly manually over the affected area to determine the severity of the situation. Switch between infrared and visual views to evaluate the situation.
    - Use the Link Zoom feature to zoom in simultaneously with thermal and visual sensors.
    - Install the IR Density Filter to increase the measurement range of the thermal sensor.
    - Share the coordinates with ground teams through the DJI Pilot 2 QR code or DJI FlightHub 2.
  2. Post Mission Documentation:
    - Collect the videos and photos captured during the mission through DJI FlightHub 2 or download from the payload SD card to be used as supporting documentation for post-disaster analysis.
Water Rescue
The Matrice 30T strikes the perfect balance between portability and performance, integrating a hybrid sensor with visual, thermal, and laser range finder capabilities for optimal performance in a variety of rescue scenarios.
Rugged, weatherproof mid-size airframe, provides balance between portability and endurance.
640 × 512 thermal radiometric sensor for accurate temperature readings.
Fast deployment with superior performance.
Optical zoom for close-up details from a distance.
Laser range finder to get accurate coordinates of objects.
Drone Platform
Matrice 30T
Weight (incl. two batteries): 3770 ± 10 g.
Max Flight Time: 41 min.
Sensing system: Six-directional sensing and positioning.
Environment Adaptability: Max Service Ceiling Above Sea Level (without other payload) 7,000 m (with 1676 propellers); Max Wind Resistance 12 m/s.
Zoom camera: 1/2-inch CMOS, Effective pixels: 48MP.
Payload And Software
DJI Pilot 2
Ground control
DJI FlightHub 2
Drone and dock's cloud management system
Workflow
  1. Mission Execution:
    - Using DJI Pilot 2 app, add the last known location to the map as a GPS Pin.
    - In the DJI Pilot 2 camera view, use the AR of the pin to fly directly toward the correct coordinates.
    - Fly manually over search areas switching between visual and thermal views to identify the missing person.
    - Utilize white hot or black hot palettes as needed along with high gain mode.
    - Once the subject is identified. Get accurate coordinates using the Pin Point function. Share Pin Point coordinates to ground teams through DJI Pilots 2 QR code or DJI FlightHub 2.
  2. Post Mission Documentation:
    - Collect the videos and photos captured during the mission through DJI FlightHub 2 or download from the drone SD card to be used as supporting documentation for post-disaster analysis. 
Brush Clearance and Inspection
The Mavic 3T offers unparalleled portability and performance for scanning large areas with ease. Its small airframe is convenient to carry on patrol vehicles, and with visual and thermal cameras equipped, it's the ideal solution for identifying wildfire risks.
Compact and lightweight design, less than 1kg and easy to carry in the response vehicle.
Fast and easy deployment, get airborne in around 30 seconds.
640 × 512 thermal radiometric sensor for accurate temperature readings.
Thermal palettes and temperature measurement tools for easy data interpretation.
Automated mapping missions for quick 2D and 3D model data collection.
Drone Platform
DJI Mavic 3T
Weight: 920 g
Max Flight Time (no wind): 45 mins
Sensing type: Omnidirectional binocular vision system, supplemented with an infrared sensor at the bottom of the aircraft
Environment Adaptability: Max Take-off Altitude Above Sea Level 6000m; Max Wind Speed Resistance 12 m/s
Wide Camera: 1/2-inch CMOS, Effective pixels: 48 MP
Tele Camera: 1/2-inch CMOS, Effective pixels: 12 MP
Thermal Camera: Video Resolution 640×512@30Hz
Compatible with RTK module and DJI Cellular module
Payload And Software
DJI Pilot 2
Ground control
DJI Terra
Modeling and flight mission plan
DJI FlightHub 2
Drone and dock's cloud management system
Workflow
  1. Mission Execution:
    - Plan a 2D or Smart Oblique Mission based on the actual landscape situation to generate regular orthomosaic images or 3D Models.
    - Fly manually over the affected area looking for hotspots. Switch between infrared and visual views (wide or zoom) to evaluate the infrastructure and vegetation.
  2. Post Mission Documentation:
    - Map the affected areas for post-incident reports and preventative action briefs.

Contact Us

For more information about product demo or trial, leave your contact information in the form below. You can also reach out to your local dealer for more information.

I agree to the DJI Privacy Policy and the Terms of Use.

More Applications

Urban Fires

Wildfires

Disaster Prevention and Response