How do I apply for a trial?
There are two ways to apply for a trial:
1. Go to the DJI Modify page on the DJI official website, click "Apply Now," follow the instructions for filling in the information, and then submit your application.
2. Visit the following link, follow the instructions for filling in the information, and submit your application:
How do I activate the DJI Modify license?
For First use:
1. When you launch DJI Modify for the first time and log into your DJI account, an activation pop-up will appear.
2. Enter the activation code in the pop-up to activate DJI Modify.

For Second Use:
1. Click on the avatar (User Center) in the upper right corner of the DJI Modify interface, then click "License Manager".
2. In the license manager pop-up, click "Activate More," and the activation pop-up will appear.
3. Enter the activation code in the pop-up to activate.
What are the system requirements for using DJI Modify?
Minimum requirements: Requires a Windows 10 or higher (64-bit) operating system with at least 32 GB of RAM, and an NVIDIA graphics card with a compute capability of 5.0 or higher and at least 4 GB of GPU memory, equivalent to or better than NVIDIA GeForce GTX 1050Ti.

Recommended requirements: Requires a Windows 10 or higher (64-bit) operating system with 64 GB of RAM, and an NVIDIA graphics card with a compute capability of 7.0 or higher and at least 8 GB of GPU memory, equivalent to or better than NVIDIA GeForce RTX 2070.
Can DJI Modify be used without an internet connection?
No. Using DJI Modify requires a network license, so a constant network connection is needed during the operation.
Does the DJI Modify license allow for unbinding?
The paid version of DJI Modify supports unbinding, with a certain number of unbinds allowed per year, and the unbinding policies vary among different packages.
The trial version of DJI Modify does not support unbinding.
Does DJI Modify support models from third-party modeling software?
Currently, no. DJI Modify can only edit visible light 3D models reconstructed with DJI Terra V4.0.0 or higher.
After creating a new project in DJI Modify, can I move, copy, or rename the modelling result folders created by DJI Terra?
Currently, no. Renaming the modeling results in DJI Terra will prevent DJI Modify from being able to edit the model.
After creating a new project in DJI Modify, can I move the project's folder?
Yes, but the moved project will not be displayed in the project list. You will need to import the project into DJI Modify again.
Why do I get a file missing notification when importing a renamed task created by DJI Terra into DJI Modify?
Please avoid changing the task names in DJI Terra to prevent inaccessible models and other files.
What are high-quality and low-quality models?
High-quality models, typically in ply or obj formats, are used for small-area adjustments such as flattening, hole filling, and texture repair.
Low-quality models, often in b3dm or osgb formats, are used for large-region adjustments like floating parts removal and water surface repair.
What should I do if a prompt about insufficient memory or video memory appears when loading high-quality models?
The prompt implies that the computer's capacity is limited and cannot load an unlimited number of high-quality models. It will appear when too many blocks are loaded. Consider the following measures:
1. It is recommended to use DJI Terra's block splitting function, and customize the edge lengths up 300×300 m.
2. Unload some of the loaded high-quality model blocks before loading new ones.
3. Save the current operation, exit the software and reopen it. Then try loading new blocks.
Why do new floating parts appear after I select and delete visible ones and then zoom in on the model?
The floating part removal function currently operates on a “what you see is what you get” basis, which only eliminates the floating parts that are visible in the current view. As you zoom in on the model, model blocks get updated, and previously unseen floating parts will then be displayed.
Recommended workflow: select all floating parts> deselect the ones to keep > delete, so as to keep the larger visible floating parts and remove the others.
Is it possible to customize the water surface texture?
Currently, no. You can fine-tune the water surface texture in Repair mode following the water surface repair.
Why are flattened meshes not parallel to the ground after using the flattening function?
The current flattening function flattens the selected region based on the surrounding meshes, creating an approximately flat surface, rather than flattening them to the ground.
Why are some vehicles in the model not recognized?
Vehicle recognition works best at a near-top-down view at an appropriate height. For optimal vehicle selection, adjust the view to an approximately top-down angle. You can also adjust the selected region using the Add to Selection and Subtract from Selection tools.
Why are there sometimes gaps at the edges when performing cross-block flattening?
When DJI Modify flattens multiple blocks, it processes each block independently, which might result in height discrepancies between blocks.
How can I quickly cancel a selection?
While drawing a selection, you can click the Unselect button on the interface or press the ESC key to cancel the current selection.
Can hole fill be done across multiple blocks?
For closed holes, hole filling can span across blocks.
For non-closed holes, which refer to partial areas of a hole manually selected by the user, cross-block filling is not supported.
Why is the texture a solid color after hole filling?
DJI Modify will use a solid color for the hole filling when it cannot access the aerial images from aerotriangulation results of the region ensuring that the aerial images from aerotriangulation results are readable for texture repair.
What should I do if the texture after hole filling doesn't meet my expectations?
You can modify the texture using the Repair tool.
Why are some holes in the walls not recognized? How should I handle this?
Holes in wall surfaces might structurally resemble “tunnels” in mesh topology, which are not recognized as holes by DJI Modify.
To address this, use the Custom tool in conjunction with the Subtract from Selection function to select the surface of the tunnel-like structure for hole filling.
What does render mean?
Different editing tools in DJI Modify apply to either high-quality or low-quality models, and the process called “rendering” in modeling and film industries is essentially synchronizing the modifications across both types of models in DJI Modify.
Why does the model export speed vary, being quick sometimes and slow other times?
The export speed depends on whether you've performed model editing operations. If so, DJI Modify needs to perform a rendering process; if not, it directly exports the model, which is faster than rendering.
Why am I getting an automatic save notification if I never manually saved?
DJI Modify uses an auto-save strategy, which executes auto-saves upon exiting a project, unloading high-quality models, and before rendering and exporting model to be exported to prevent potential progress loss.
Why can I sometimes perform multiple undos, and other times only one?
DJI Modify supports multiple undos for low-quality models, with a default maximum of 30 undos that adjust according to available computer memory.
For high-quality models, if no mesh adjustment has been made, the rules for undos are the same as for low-quality models; however, if any mesh adjustments have been made, the default number of undos is one.
What is a historical version in Version History?
A historical version is a backup of your current project at a particular point in time.
When does DJI Modify create a historical version?
DJI Modify automatically saves a version before rendering whenever the user starts a rendering process.
Which model formats does DJI Modify support for export?
Upon clicking export, DJI Modify defaults to exporting the 3D model in b3dm, osgb, ply, obj, and s3mb formats.
What coordinate system do models exported from DJI Modify use?
The coordinate system of a model exported from DJI Modify is consistent with that upon import. However, DJI Modify does not currently support 3D models that had their coordinate systems adjusted through seven-parameter transformations.
Is it possible to extend the cloud storage space offered by DJI Modify?
Currently, no.
Where are the models stored after being uploaded to the cloud by DJI Modify?
Model data from the Chinese mainland is stored on servers located within the Chinese mainland. Model data from other countries/regions is stored on US servers.
Does DJI Modify include coordinate information when uploading models to the cloud?
Coordinate information is removed before uploading models to the cloud through DJI Modify.
What block settings should I use when modeling in DJI Terra for the optimal model editing results?
For ordinary scenarios, it’s recommended to customize the block size under the settings “3D Model > Advanced Settings > Region of Interest (ROI)/Block > Block Splitting Options” with sides smaller than 300×300 m.
For circle or close-range scenes, there's no need to adjust block splitting settings.
How do I view the model in DJI Modify?
Press and hold the scroll wheel of the mouse to rotate the model; press and hold the right mouse button, or hold down the spacebar and press and hold the left mouse button to drag the model.